vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 1 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power smd led plcc-2 plus description the vlmr51.., vlmk51.., and vlmy51.. led series in plcc2 plus package are an advanced product in terms of high luminous flux and low thermal resistance. in combination with the small package outline (3.5 mm x 3.5 mm x 1.2 mm) the plcc2 plus is an ideal choice for backlighting, signage, exteri or and interior automotive lighting as well as decorative lighting. product group and package data ? product group: led ? package: smd plcc-2 plus ? product series: power ? angle of half intensity: 60 features ? high efficient alingap technology ? compact package out line 3.5 mm x 3.5 mm x 1.2 mm ? angle of half intensity ? = 60 ? luminous intensity and color categorized per packing unit ? luminous intensity rati o per packing unit ? min. / ? max. < 1.6 ? esd-withstand voltage: up to 2 kv (hbm) according to jesd22-a114-b ? preconditioning accordi ng to jedec level 2a ? compatible with ir-reflow soldering profiles according to j-std-020 ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior automo tive lighting: dashboard, brake lights, turn lights, backlighting ? signal and symbol luminaire ? decorative lighting ? architectural lighting ? backlighting: lcds, switches, keys, illuminated advertising ?marker lights ? traffic lights 22068 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. vlmr51z1aa-gs08 red 4500 7100 9000 140 620 - 630 140 1.9 2.2 2.65 140 alingap on si VLMK51Z1AA-GS08 amber 4500 7100 9000 140 610 - 621 140 1.9 2.2 2.65 140 alingap on si vlmy51z1aa-gs08 yellow 4500 7100 9000 140 585 - 594 140 1.9 2.2 2.65 140 alingap on si absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? vlmr51.., vlmk51.., vlmy51.. parameter test condition symbol value unit reverse voltage i r = 10 a v r 12 v dc forward current i f 200 ma surge forward current t p ? 10 s i fsm 1000 ma power di ssipation p v 530 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 110 c storage temperature range t stg - 40 to + 110 c thermal resistance junction/solder point r thjs 50 k/w thermal resistance juncti on/ambient mounted on pcb, total cu area > 900 mm 2 r thja 100 k/w
vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 2 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? luminous flux is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped on any one reel. ? in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmr51.., red parameter test condition part symbol min. typ. max. unit luminous intensity i f = 140 ma vlmr51z1aa i v 4500 7100 9000 mcd luminous flux i f = 140 ma vlmr51z1aa ? v -20-lm dominant wavelength i f = 140 ma ? d 620 - 630 nm angle of half intensity i f = 140 ma ? - 60-deg forward voltage i f = 140 ma v f 1.9 2.2 2.65 v temperature coefficient i v i f = 140 ma, 0 c ? t ? 100 c tc iv - - 26.8 - mcd/k temperature coefficient v f i f = 140 ma, 0 c ? t ? 100 c tc v -- 3.5-mv/k temperature coefficient ? d i f = 140 ma, 0 c ? t ? 100 c tc ? d -0.06-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmk51.., amber parameter test condition part symbol min. typ. max. unit luminous intensity i f = 140 ma vlmk51z1aa i v 4500 7100 9000 mcd luminous flux i f = 140 ma vlmk51z1aa ? v -20-lm dominant wavelength i f = 140 ma ? d 610 - 621 nm angle of half intensity i f = 140 ma ? - 60-deg forward voltage i f = 140 ma v f 1.9 2.2 2.65 v temperature coefficient i v i f = 140 ma, 0 c ? t ? 100 c tc iv - - 35.3 - mcd/k temperature coefficient v f i f = 140 ma, 0 c ? t ? 100 c tc v -- 2.9-mv/k temperature coefficient ? d i f = 140 ma, 0 c ? t ? 100 c tc ? d -0.07-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vlmy51.., yellow parameter test condition part symbol min. typ. max. unit luminous intensity i f = 140 ma vlmy51z1aa i v 4500 7100 9000 mcd luminous flux i f = 140 ma vlmy51z1aa ? v -20-lm dominant wavelength i f = 140 ma ? d 585 - 594 nm angle of half intensity i f = 140 ma ? - 60-deg forward voltage i f = 140 ma v f 1.9 2.2 2.65 v temperature coefficient i v i f = 140 ma, 0 c ? t ? 100 c tc iv - - 55.5 - mcd/k temperature coefficient v f i f = 140 ma, 0 c ? t ? 100 c tc v -- 2.9-mv/k temperature coefficient ? d i f = 140 ma, 0 c ? t ? 100 c tc ? d -0.09-nm/k luminous intensity classification group light intensity (mcd) standard min. max. z1 4500 5600 z2 5600 7150 aa 7150 9000 color classification group dom. wavelength (nm) amber yellow min. max. min. max. w 610 615 - - x 615 621 585 588 y - - 588 591 z - - 591 594
vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 3 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - maximum forward current vs. solder point temperature fig. 3 - relative luminous intensity vs. forward current fig. 4 - relative forward voltage vs. forward current fig. 5 - forward current vs. duty ratio fig. 6 - relative intensity vs. wavelength t amb - ambient temperature (c) 22069 0 50 100 150 200 250 0 20 40 60 80 100 120 i fmax. - maximum forward current (ma) t sp - solder point temperature (c) 22070 i fmax. - maximum forward current (ma) 0 50 100 150 200 250 0 20 40 60 80 100 120 i f - forward current (ma) 22071 i v rel - luminous intensity 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 50 100 150 200 i f - forward current (ma) 22072 v f - forward voltage (v) 0 0.5 1.0 1.5 2.0 2.5 0 50 100 150 200 22073 100 1000 1 10 100 1000 duty ratio (%); t a = 25 c, t p < 10 s i fmax. - maximum forward current (ma) 22074 0.0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 660 680 i rel - relative intensity - wavelenght (nm) yellow amber red
vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 4 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - relative luminous in tensity vs. angular displacement reel dimensions in millimeters 0.4 0.2 0 95 10043 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i - relative luminous intensity vrel ? - angular displacement i ss ue: 2; 19.03.10 22067 drawing-no.: 9.800-5104.01-4 ? 180 ? 62.5 - 2.5 12.4 + 2 s pecification s according to din technical drawing s not indicated tolerance s 0.5 18.4 ? 13 0.2 label area with depre ss ion (max., mea s ured at hub) (mea s ured at outer edge) material: black s tatic di ss ipative gs 08 = 1000 pc s
vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 5 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping and orientation dimensions in millimeters trailer component leader s pecification s according to din technical drawing s drawing-no.: 9.700-5348.01-4 i ss ue: 1; 01.03.10 22066 200 mm min. for ? 180 reel 480 mm min. for ? 180 reel u s er feed direction 4 0.1 1.75 0.1 3.75 0.1 8 0.1 2 0.05 5.5 0.05 12 + 0.3 - 0.1 2.2 0.1 0.279 0.02 ? 1.5 + 0.1 reel s come in q uantity of 1000 unit s . 3.75 0.1 package marking ? 1.5 + 0.25
vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 6 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 recommended pad design dimensions in millimeters s pecification s according to din technical drawing s drawing-no.: 6.541-5084.01-4 i ss ue: 1 ; 13.04.10 22103 recommended s older pad additional area covered by s older re s i s t for improved heat di ss ipation. package mark 3.5 0.2 3.5 0.2 0.05 3.7 0.2 ? 2.6 1.5 3.1 0.5 0.7 1.2 0.2 2.6 0.5 2.8 10 9.4 1.4 3.4 4.5 a c
vlmr51z1aa, vlmk51z1aa, vlmy51z1aa www.vishay.com vishay semiconductors rev. 1.4, 16-may-13 7 document number: 83419 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 soldering profile fig. 8 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) bar code product label (example) a) type of component b) manufacturing plant c) sel - selection code (bin): ? e.g.: v1 = code for luminous intensity group ? 5l = code for chrom. coordinate group d) date code year/week e) day code (e.g. 1: monday) f) batch no. g) total quantity h) company code dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed into a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity ? 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) ? or ? 96 h at 60 c + 5 c and < 5 % rh for all device containers ? or ? 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22 -a112 level 2a label is included on all dry bags. example of jesd22-a112 level 2a label esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning labels are on the packaging. 0 50 100 150 200 250 300 0 50 100 150 200 250 300 t [s] t [c] 255c 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 255 c 19470-3 max. 2 cycles allowed ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a 106 37 a h bc d e f g 19795 aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
